Updated Nov 21, 2026· 9 min read

Key takeaways

  • Compare the best 1-2-3 blocks for mill setup, layout and inspection, from 23-hole threaded pairs to no-hole precision blocks and screw kits in cases.

Few tools earn a permanent spot on the mill table, but a matched pair of 1-2-3 blocks is one of them. Each block is a hardened steel rectangular prism ground to nominal dimensions of 1 inch by 2 inches by 3 inches, and serves as a spacer, a riser, a parallel, a squareness reference, or a quick layout gauge. Machinists stack them under workpieces, bolt them into fixtures, and reach for them whenever a setup needs a known height or a flat, square edge. The differences between listings come down to three things: the hole pattern in the faces, the tolerance the maker states, and what arrives in the box alongside the blocks. This guide compares five pairs sold for machine-shop use: threaded-hole workhorses, a plain no-hole pair, and a kit that ships with its own screws and case.

Our top pick: HFS Ultra Precision 1-2-3 Blocks with Screws and Case. Runner-up: Anytime Tools 1-2-3 Blocks 23 Holes AT202663.

As an Amazon Associate, we earn from qualifying purchases.

Quick answer

For most shops, a hardened steel 23-hole matched pair is the default buy: the holes make the blocks easy to bolt together and clamp into setups. The HFS pair states the tightest tolerance and adds screws and a case. The Shars pair suits plain, uninterrupted faces. Anytime Tools offers 23-hole and one-hole pairs, and findmall adds another 23-hole option.

HFS Ultra Precision 1-2-3 Blocks with Screws and Case

The HFS pair is the kit-oriented pick of this group. The listing describes the set as ultra precision blocks with a stated accuracy of 0.0001 inch, sold as a matched pair of two blocks, and supplied with screws and a plastic case. The screws matter more than they might seem: 1-2-3 blocks are often bolted face to face to build a taller riser, clamped against a vise jaw, or fastened to a fixture plate, and having the correct hardware in the box means the blocks can go straight into that kind of work without a separate hardware order. The plastic case keeps the ground faces protected in a drawer or tool cart, which is where precision blocks usually pick up the nicks and burrs that ruin their usefulness. The maker behind the listing is Hardware Factory Store. Buyers who plan to use the pair as a dimensional reference, checking a micrometer or setting a known gap, get the most from the tight stated tolerance here. Buyers who mostly need rough spacers for clamping will not notice the difference between this pair and a looser one, but as a single purchase meant to cover both setup and light inspection duty, this is the most complete package of the five.

Anytime Tools 1-2-3 Blocks 23 Holes

The Anytime Tools 23-hole pair, model AT202663, follows the classic pattern for this tool: two matched blocks of hardened steel at the nominal 1 by 2 by 3 inch size, with 23 holes distributed across the faces. A dense hole pattern is the flexible option. Holes give a toe clamp something to register against, let the blocks be bolted together at right angles to form a corner or a step, and allow a block to be fastened down to a fixture or an angle plate instead of relying on friction alone. With 23 holes there is usually a hole near wherever the setup needs one, on any of the three face sizes. Hardened steel is the right material call for blocks that will live on a mill table, since the faces resist the dings that softer blocks collect from chips, clamps, and dropped workpieces. This is the pair to choose when the blocks will spend most of their time as setup hardware rather than as inspection references: fixturing, spacing, and workholding support where the hole pattern earns its keep every day. Buyers comparing the two Anytime Tools listings should treat the hole count as the deciding factor, because the construction and size are shared.

Shars 1-2-3 Blocks No Holes 303-5500N

The Shars 303-5500N pair takes the opposite approach to holes: there are none. The listing describes a matched pair of precision blocks with a stated accuracy of 0.0002 inch and plain, uninterrupted faces on all sides. That plainness is a genuine advantage in several common jobs. Used as parallels in a vise, the blocks present a continuous bearing surface with no hole edges to catch a chip or tilt a workpiece. Used as risers under a part on the mill table, there is no recess to pack with swarf and coolant. Used as a squareness or flatness reference against a surface plate, every face is fully available. The trade-off is workholding: with no holes, the pair cannot be bolted to a fixture or joined to each other with screws, so setups depend on clamps and friction. Shops that already own a holed pair often add a plain pair for exactly the jobs listed above, and shops buying only one pair should think about which style of work dominates. For inspection-leaning use, where the faces themselves are the product, the Shars pair makes a clean case, and its stated tolerance sits close to the tightest in this group.

findmall 1-2-3 Blocks 23 Holes

The findmall pair is a second 23-hole option built on the same pattern as the Anytime Tools set: a matched pair of blocks in hardened steel at the standard 1 by 2 by 3 inch nominal size, with 23 holes across the faces for bolting and clamping flexibility. The listing gives a package size of 4.29 by 3.19 by 1.26 inches and a package weight of 1 pound, consistent with a compact two-block set that stores easily in a machinist chest drawer. The listing dates to September 2019, so it is a long-running product rather than a new entry in the category. This pair competes directly with the other 23-hole set in this guide; choose between them on the listing details that matter: which holes are threaded, whether a case is included, and the tolerance each maker states. Hole threading is the detail most often skimmed and most often regretted, because a setup that needs a bolted joint needs threaded holes or through-holes with room for a nut, and the two patterns are not interchangeable. For general setup, spacing, and fixturing work, this pair covers the standard duties of the type.

Anytime Tools 1-2-3 Blocks 1 Hole

The second Anytime Tools pair, model AT202658, trims the hole pattern down to a single hole in each block. The construction matches its sibling: matched pair, hardened steel, nominal 1 by 2 by 3 inch dimensions. A one-hole pattern suits buyers who want mostly solid faces but still want one positive location point, for example pinning a block in place on a fixture or registering it against a stop, without giving up bearing area on every face to a full grid of holes. It is also the simplest pattern to keep clean, since there is only one recess per block to clear of chips before the block goes back into service as a spacer or parallel. The compromise is flexibility: angled bolt-together assemblies, corner builds, and multi-point fastening are off the table, so this pair works best as spacers, risers, and light references rather than as fixture building material. Shops that already own a holed pair and want a cleaner second pair for vise and inspection work will find this pattern appealing, and first-time buyers who know their work is spacing and support rather than fixturing can choose it without missing the extra holes.

How to choose

Start with the hole pattern, because it decides what the blocks can do. A 23-hole pair is the fixture builder: it bolts together, clamps down, and registers against stops in almost any orientation. A no-hole pair is the surface tool: best as parallels, risers, and references where an unbroken face matters. A one-hole pair sits between the two. Next, look at the stated tolerance. Listings in this group state figures such as 0.0001 inch and 0.0002 inch; tighter figures suit inspection use, while setup-only work tolerates looser blocks. Confirm with a micrometer on arrival that the pair measures at nominal size and matches itself. Then check the extras: screws in the box save a hardware hunt, and a fitted case protects ground faces in storage. Finally, check the listing for which holes are threaded before ordering, because threaded and clearance holes serve different setups and the product title rarely says.

Who should skip

Skip this category if the work requires certified dimensional standards. These are shop blocks with maker-stated tolerances, not calibration-grade gage blocks with certificates; a standards room should buy certified gage block sets instead. Skip them if the shop works in metric: the metric counterpart is the 25-50-75 block, and mixing the two systems in one setup invites errors. Woodworkers should also look elsewhere, since woodworking setup blocks are a different product family sold for router tables and saws. And if the only job is spacing a vise once, a pair of ordinary parallels costs less effort to source than precision blocks whose accuracy will never be used.

FAQ

What are 1-2-3 blocks used for?

They are general-purpose setup and reference blocks for machining. Common jobs include raising a workpiece to a known height in a vise or on the mill table, spacing and paralleling parts during clamping, checking squareness against a known face, building simple fixtures by bolting blocks together, and serving as a quick dimensional reference during layout. Their value is that one tool covers all of these jobs at a known size.

Do the holes in 1-2-3 blocks matter?

Yes, the hole pattern is the main functional difference between listings. Many holes allow bolting, clamping, and angled assemblies, which suits fixturing. No holes give an unbroken face, which suits parallels and reference work. A single hole offers one locating point with mostly solid faces. Check whether holes are threaded or clearance type before buying, because a bolted setup depends on it.

How accurate are shop-grade 1-2-3 blocks?

Listings in this category state tolerances such as 0.0001 inch or 0.0002 inch across the block dimensions. That is accurate enough for setup work and for informal checks against micrometers and indicators. It is not a substitute for certified gage blocks where traceable calibration is required. Measuring a new pair with a micrometer on arrival is a sensible habit, since the pair should match itself as well as the nominal sizes.

How should 1-2-3 blocks be cared for?

Keep the faces clean and lightly oiled, because hardened steel blocks can still pick up surface rust in a damp shop. Store them in their case or wrapped, not loose in a drawer where they strike other tools. Stone off any raised burr with a fine stone before precision use, since a single nick can lift a workpiece or spoil a reference face. Avoid using them as pry bars or hammering surfaces.

Final verdict

A matched pair of 1-2-3 blocks is one of the highest-value purchases a small machine shop can make, and the right pair depends on the work. The HFS set is the most complete single purchase, pairing the tightest stated tolerance with screws and a case. The Anytime Tools and findmall 23-hole pairs are the flexible fixturing choices, the Shars pair is the pick for unbroken reference faces, and the one-hole Anytime Tools pair suits clean, simple spacing duty. Buy the hole pattern that matches the dominant job, verify the pair with a micrometer when it arrives, and the blocks will stay in daily use for years.

Product and ASIN Reference

Product ASIN
HFS Ultra Precision 1-2-3 Blocks with Screws and Case B00OVBB5F8
Anytime Tools 1-2-3 Blocks 23 Holes AT202663 B00BGBOJZO
Shars 1-2-3 Blocks No Holes 303-5500N B07ZDJGXD3
findmall 1-2-3 Blocks 23 Holes B07XM5BLHJ
Anytime Tools 1-2-3 Blocks 1 Hole AT202658 B00UF0SCAA
A
affadmin
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.
Best 1-2-3 Blocks for Machinist Setup and InspectionCheck price on Amazon

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Business

A free business account with business pricing and bulk-buying tools for work, shop or home office.

Create a business account
Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free

As an Amazon Associate we earn from qualifying purchases.