Key takeaways
- Compare the best poe switches for powering cameras, phones and access points, from a compact five-port desktop pick to a 16-port rackmount model.
A PoE switch sends power and data down a single Ethernet cable, so a security camera, a desk phone or a wireless access point can sit wherever the cable reaches instead of wherever a spare outlet happens to be. For a home lab, a small office, or a storage room watched by network cameras, the right switch clears away a row of wall adapters and gives every powered device a wired link.
The five switches below cover the shapes most buyers actually need: an eight-port unmanaged model where every port carries PoE+, a 16-port rackmount unit for a cabinet, a managed model with VLAN and QoS controls, a long-range model with an extend mode for distant cameras, and a compact five-port desktop switch for small clusters. Every figure quoted here, from port counts to PoE budgets, comes from the product listing, and per-port standards are reported exactly as listed rather than rounded up to a higher tier.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
The NETGEAR GS108PP is the best pick for most camera, phone and access point installs: all eight gigabit ports deliver PoE+ with a shared 123W budget and zero configuration. For a rack, choose the 16-port NETGEAR JGS516PE; for long camera runs, the TP-Link TL-SG1210P reaches 250 m in Extend Mode.
NETGEAR GS108PP 8-Port Gigabit PoE+ Unmanaged Switch
The GS108PP is the straightforward answer when every device on the switch needs power. All eight gigabit ports are PoE+ ports, so there is no counting which sockets carry power and which do not, and its shared 123 W budget is generous for its size. It is unmanaged and plug and play: connect the cables, and cameras, phones and access points come up on one flat network.
The listing’s FlexPoE detail is worth knowing. The headline 123 W budget applies with the supplied power adapter; NETGEAR lists lower budgets of 83 W or 60 W when the switch is paired with separately purchased power supply modules. Budget your devices against the configuration you run. The honest limitation is the flip side of its simplicity: with no management interface there are no VLANs, no per-port controls and no traffic separation, so a camera network that must be isolated from office traffic belongs on the managed pick below.
Specs
- Ports: 8 gigabit Ethernet ports, all 8 with PoE+
- PoE standard: 802.3af/at (PoE+), up to 30 W per port
- Total PoE budget: 123 W with the supplied adapter (FlexPoE options at 83 W or 60 W with other supplies)
- Management: none, plug and play
- Mounting: desktop, wall mount or rackmount
- Housing: metal, fanless, with limited lifetime protection as listed
NETGEAR JGS516PE 16-Port Rackmount PoE Switch
The JGS516PE is the rackmount option, built for a cabinet that mixes powered devices with plain wired gear. Eight of its sixteen gigabit ports carry PoE, leaving the other eight for non-powered rack residents: a NAS, an NVR, a server or an uplink. As a NETGEAR Plus switch it adds light management on top of the power, including VLANs, QoS, IGMP snooping and traffic prioritization, enough to keep camera traffic grouped sensibly.
Two limits deserve plain statement. Only half the ports carry power, so plan the layout before the cables are dressed. And the 85 W total budget works out to the least power per powered port in this group, with the listing’s PoE tier at the 802.3af level rather than PoE+. A set of fixed cameras and phones fits comfortably; a row of hungry PoE+ access points will not get full per-port power here, and those loads belong on the GS108PP or the TL-SG1210P instead.
Specs
- Ports: 16 gigabit Ethernet ports
- PoE ports: 8 ports with 802.3af PoE
- Total PoE budget: 85 W
- Management: Plus features including VLAN, QoS, IGMP snooping and traffic prioritization
- Mounting: rackmount, with desktop placement also supported
- Protection: ProSAFE lifetime protection as listed
TP-Link TL-SG108PE V3 Easy Smart Managed PoE Switch
The TL-SG108PE is the managed pick, and the one to choose when the powered devices need to live on their own segment. Its Easy Smart interface, reached through a web browser or TP-Link’s configuration utility, provides VLAN support, QoS, IGMP snooping, link aggregation and traffic monitoring. For readers who keep cameras pointed at a storage room, that VLAN support is the practical reason to buy it: cameras sit on a separate virtual network from the machines holding the data.
The trade is port mix. Four of the eight gigabit ports are PoE+ ports sharing a 64 W budget; the other four are plain gigabit ports for uplinks and non-powered devices. Four powered endpoints cover a phone, a camera or two and an access point, but a fifth powered device needs an injector or a different switch. The listing also describes a PoE priority function that sheds the lowest-priority port first if the budget is exceeded, keeping the most important camera alive.
Specs
- Ports: 8 gigabit RJ45 ports
- PoE ports: 4 PoE+ ports (ports 1–4), 802.3af/at, up to 30 W per port
- Total PoE budget: 64 W
- Management: Easy Smart web interface with VLAN, QoS, IGMP snooping, link aggregation and traffic monitoring
- Switching capacity: 16 Gbps
- Housing: metal, fanless
TP-Link TL-SG1210P 10-Port Gigabit PoE+ Switch with Extend Mode
The TL-SG1210P is built for cameras that live a long way from the switch. Eight gigabit ports carry PoE+, joined by one gigabit uplink port and one gigabit SFP slot for a fiber run back to the core network. Its headline feature is Extend Mode: on ports 1–4 the listing stretches power and data transmission out to 250 m, well past the usual 100 m Ethernet limit, which opens up gates, barns and warehouse ends that would otherwise need a second switch midway.
The trade behind that reach should be clear before buying. With Extend Mode on, the affected ports drop to 10 Mbps, which a fixed camera feed handles easily but an access point serving many clients does not. The 63 W budget is also modest across eight PoE+ ports, so add up device draw before committing all eight. The listing rounds out the surveillance focus with a Priority Mode for ports 1–2, an Isolation Mode that separates client traffic, and PoE Auto Recovery, which reboots a hung powered device by cycling its port power.
Specs
- Ports: 10 total — 8 PoE+ gigabit RJ45 ports, 1 gigabit RJ45 uplink port, 1 gigabit SFP slot
- PoE standard: 802.3af/at, up to 30 W per PoE port
- Total PoE budget: 63 W
- Extend Mode: ports 1–4 reach up to 250 m, at a reduced 10 Mbps link speed
- Extra modes: Priority Mode (ports 1–2), Isolation Mode, PoE Auto Recovery
- Management: none, plug and play
- Housing: metal, desktop or wall mount
- Switching capacity: 20 Gbps
TP-Link TL-SG1005P 5-Port Gigabit PoE+ Desktop Switch
The TL-SG1005P is the compact desktop option for a small, finished job: a couple of cameras near a NAS, a phone and an access point on a desk run, or a single room that needs power without a rack. Four of its five gigabit ports are PoE+ ports with a 65 W shared budget, a figure that compares well against its size, and the fifth port serves as a plain gigabit uplink. It is unmanaged and plug and play, in a metal fanless housing with shielded ports that sits silently on a desk or shelf.
Its limits are simply its dimensions. Four powered ports and one uplink leave no room to grow, and there is no SFP slot for a fiber uplink. Buy it when the device count is known and stable, and size up to the GS108PP the moment a fifth powered device is even a possibility. Within its intended footprint, the per-port PoE+ support and the 65 W budget ask for no compromises on the devices it does power.
Specs
- Ports: 5 gigabit RJ45 ports
- PoE ports: 4 PoE+ ports, 802.3af/at, up to 30 W per port
- Total PoE budget: 65 W
- Uplink: 1 non-PoE gigabit port
- Management: none, plug and play; QoS and IGMP snooping listed
- Housing: metal with shielded ports, fanless, desktop
How to choose
Count powered ports before total ports. A 16-port switch with eight PoE ports powers eight devices, not sixteen, and several models in this category power only half their sockets. List the cameras, phones and access points first, then match the switch to that count with a spare port or two for the device that always gets added later.
Add up wattage next, on two levels. Per port, 802.3af delivers up to 15.4 W, which covers most fixed cameras and desk phones, while 802.3at (PoE+) raises the ceiling to 30 W for hungrier gear such as Wi-Fi 6 access points and motorized PTZ cameras. Then compare the sum of every device’s draw against the switch’s total budget, keeping headroom rather than planning to spend every promised watt.
Decide whether management matters. Unmanaged switches are cheaper and impossible to misconfigure, but a managed or Plus model lets you place cameras on their own VLAN, prioritize voice traffic with QoS, and see port-level status when a device drops. Finally, measure the longest cable run: beyond 100 m, an extend-mode model like the TL-SG1210P or a second switch becomes necessary, and a rack layout calls for a rackmount model rather than a desktop box.
Who should skip
Skip this whole category if you have only one or two powered devices; a single-port PoE injector beside the existing switch is simpler and cheaper. Skip all five models here if you need 802.3bt PoE++, the higher tier used by the hungriest PTZ cameras with heaters and blower fans and by some large Wi-Fi 6E access points, because none of these listings includes it. Skip them as well if you need multi-gig or 10-gigabit uplinks, since every port here is gigabit. And if you need full enterprise management with a command-line interface, stacking or routed features, the Easy Smart and Plus models above are a lighter tier by design; shop a fully managed line instead.
Frequently Asked Questions
What is the difference between PoE, PoE+ and PoE++?
They are successive IEEE tiers. The 802.3af standard, plain PoE, delivers up to 15.4 W per port. PoE+, the 802.3at standard, raises that to 30 W per port. PoE++, the 802.3bt standard, goes higher again for the most demanding devices. Match the switch’s port standard to the requirement printed on the device: a PoE+ port happily powers an 802.3af device, while an af-only port cannot supply a device that needs PoE+ power.
How many cameras can one of these switches power?
Two numbers decide it: the count of PoE ports and the total watt budget. Divide the budget by the draw of your cameras and compare the result with the powered-port count, then take the smaller figure. The GS108PP pairs eight PoE+ ports with a 123 W budget, while the TL-SG1005P pairs four PoE+ ports with 65 W; in both cases a handful of typical fixed cameras fits, and motorized cameras with higher draw reduce the count.
Will a PoE switch damage a laptop or other device that does not use PoE?
Standards-based PoE checks for a compatible powered device before it sends power, so an ordinary wired device plugged into the same port receives data only. All five switches here follow the 802.3af/at standards as listed, which build that check in. The caution applies to non-standard passive injectors, which push voltage without checking; none of these switches is one of those.
How far can a PoE cable run reach?
A standard Ethernet run tops out at 100 m, and PoE follows the same limit. The exception in this group is the TP-Link TL-SG1210P, whose listing gives an Extend Mode reach of up to 250 m on ports 1–4, traded against a reduced 10 Mbps link speed. That speed suits a fixed camera stream; for an access point or any device that moves real data volume, keep runs within 100 m or place another switch closer.
Final verdict
For most buyers the NETGEAR GS108PP is the switch to get: eight fully powered gigabit ports, a 123 W budget and no configuration to learn. Choose the NETGEAR JGS516PE when the install lives in a rack and mixes powered cameras with non-powered storage and recording gear. Pick the TP-Link TL-SG108PE when VLANs and traffic controls matter more than port count, the TL-SG1210P when camera runs stretch past 100 m, and the TL-SG1005P when four powered ports in a small silent box cover the whole job.
Product and ASIN Reference
| Product | ASIN |
|---|---|
| NETGEAR GS108PP 8-Port Gigabit PoE+ Unmanaged Switch | B07788WK5V |
| NETGEAR JGS516PE 16-Port Rackmount PoE Switch | B00GG1ACX2 |
| TP-Link TL-SG108PE V3 Easy Smart Managed PoE Switch | B01BW0AD1W |
| TP-Link TL-SG1210P 10-Port Gigabit PoE+ Switch | B084JFPDT4 |
| TP-Link TL-SG1005P 5-Port Gigabit PoE+ Desktop Switch | B076HZFY3F |
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!