Key takeaways
- Compare the best NAS hard drives for 64-bay arrays, from IronWolf Pro to Exos X24 and Ultrastar, with bay limits, CMR and rebuild time explained.
A 64-bay NAS is a different purchase from a home NAS. Sixty-four drives at 20TB each is more than a petabyte of raw storage before parity, and a single wrong drive choice gets multiplied sixty-four times. The drive has to survive constant vibration from sixty-three neighbours, run twenty-four hours a day for years, and rebuild an array that takes days, not hours, when one drive fails. Capacity alone does not decide it. The bay rating, the recording method, the workload rating and the exact model number matter more, because at this scale a drive that was built for eight bays will not quietly become a drive built for sixty-four.
This guide is for homelab builders moving to rackmount hardware, small businesses outgrowing a 24-bay box, and anyone planning a TrueNAS or Unraid array with expansion shelves. Every drive below is an enterprise-class CMR drive rated for 550TB a year, and each one was checked against a live Amazon listing by name, model number and ASIN.
Quick Picks
As an Amazon Associate we earn from qualifying purchases.
| Product | Best for | Key spec from title |
|---|---|---|
| Seagate IronWolf Pro 20TB | A Seagate fleet with no bay cap printed | 20TB, unlimited bays |
| Seagate Exos X24 24TB | The most terabytes per bay | 24TB, 550TB per year |
| WD Ultrastar DC HC560 20TB | A data-centre build on WD drives | 20TB, 550TB per year |
| WD Gold 22TB | An enterprise WD array | 22TB, 550TB per year |
| Toshiba MG09 18TB | The lowest cost per terabyte | 18TB, 550TB per year |
How to Choose
Bay Rating Comes First
A 64-bay build needs drives that tolerate sixty-three neighbours shaking the chassis. Seagate prints a bay rating on the IronWolf Pro data sheet, and only the NT models carry the unlimited figure: the 20TB NT001 is rated for unlimited bays, while the older NE000 models stop at 24 bays with a lower 300TB yearly workload. WD Red Pro is also capped at 24 bays, so it does not qualify here at all. Exos, Ultrastar, Gold and MG09 print no bay count on their data sheets, and this guide claims none for them. They qualify by class instead: enterprise drives with CMR recording, a 550TB yearly workload and vibration sensors. Check the NAS maker’s compatibility list before ordering.
CMR Recording and a 550TB Workload
Every drive in this guide records with CMR, which writes each track beside the last one instead of overlapping it. That matters because a RAID rebuild rewrites a drive, and SMR drives slow down badly under that kind of sustained rewriting. None of the five is an SMR drive, but do not take that on trust: some Amazon listings print no recording-technology figure at all, so confirm CMR before ordering. The second number to check is the workload rating. All five are rated for 550TB written per year, which is the enterprise figure. A desktop drive rated for a fraction of that wears out years early here. Vibration sensors hold each drive steady while sixty-three neighbours shake the frame.
Capacity, Power and Cooling at 64 Drives
Sixty-four drives is a data-centre build, not a home NAS. At 20TB per drive the raw pool is 1280TB, and at 24TB it is 1536TB, before RAID parity takes two drives’ worth. The drives alone draw roughly 450 watts under load, and the chassis, fans and controllers add more, so plan a dedicated circuit and real airflow, not a shelf in a warm cupboard. Most buyers will not fit sixty-four bays in one box: expect a rackmount head unit plus expansion shelves, or a 60-bay JBOD chassis with a separate controller. Measure the rack depth before ordering, because enterprise chassis are deeper than home NAS boxes, and leave space in front and behind for air to move.
RAID Level and Rebuild Time
At this scale, RAID 6 or RAID-Z2 is the only sensible choice. RAID 5 leaves the array exposed while a single surviving drive is rebuilt, and with 20TB or 24TB drives that rebuild takes days, not hours. Two parity drives cost capacity, but they are what lets a second drive fail during a rebuild without losing the pool. ZFS users should plan the same way, with RAID-Z2 vdevs rather than RAID-Z1. Whatever the level, RAID is not a backup: it protects against a dead drive, not against deletion, ransomware or a flooded rack. Keep a separate copy of anything irreplaceable off site, and buy one drive first to confirm it works in the chassis before ordering the other sixty-three.
The 5 Best Options
Seagate IronWolf Pro 20TB (ST20000NT001)
The IronWolf Pro is the only pick whose data sheet prints a bay rating, and it prints the one that matters here: unlimited bays for the NT001 model. That makes it the choice for a buyer who wants the maker’s word that sixty-four drives in one array is a supported configuration, rather than an assumption. It is a helium-sealed CMR drive with a 550TB yearly workload, a 256MB cache and a five-year warranty that includes three years of Rescue data recovery services. IronWolf Health Management plugs into Synology and QNAP systems and flags a drive that is degrading before it fails outright, which matters when a rebuild takes days.
Specs
- 20TB capacity, 3.5-inch form factor
- SATA 6Gb/s interface, 7200 RPM
- CMR recording, 256MB cache
- Unlimited bays per the IronWolf Pro data sheet (NT001 model)
- 550TB per year workload rating, 2.5M-hour MTBF
- Up to 285 MB/s sustained transfer
- 5-year warranty with 3-year Rescue data recovery services
- IronWolf Health Management for NAS health monitoring
Best for: A Seagate fleet where the maker prints unlimited bays.
Watch out for: A listing data field reads ST20000NTZ01 while the model name reads ST20000NT001, so confirm the listing shows NT001 before ordering; the older NE000 model is capped at 24 bays and 300TB a year. One third-party seller showed stock down to 13 units in mid-November 2026, so confirm a current seller, and recertified copies circulate under a separate listing.
Seagate Exos X24 24TB (ST24000NM000H)
The Exos X24 is the capacity pick. At 24TB per drive, sixty-four bays hold 1536TB raw, which is a quarter of a petabyte more than the same array filled with 20TB drives, and the gap only grows once expansion shelves are added. It is an enterprise drive through and through: helium sealed, CMR recording, a 512MB cache and a 550TB yearly workload, built for racks that never sleep. The 24TB size also means fewer drives per petabyte, which saves power and rack space at petabyte scale. Check the chassis compatibility list first, because 24TB is still the top of the range for some older backplanes.
Specs
- 24TB capacity, 3.5-inch form factor
- SATA 6Gb/s interface, 7200 RPM
- CMR recording, 512MB cache, helium sealed
- 550TB per year workload rating, 2.5M-hour MTBF
- Up to 285 MB/s sustained transfer
- 5-year warranty
- No bay count printed on the data sheet — qualifies by enterprise class
Best for: The most terabytes per bay in a 64-bay array.
Watch out for: The listing record prints no recording-technology figure, so confirm CMR on the listing; used copies circulate under a similar title and a renewed version of the sibling NM002H model sits under a separate ASIN, so confirm the listing shows new stock of model ST24000NM000H.
WD Ultrastar DC HC560 20TB (WUH722020BLE6L4)
The Ultrastar HC560 is the data-centre drive of this group. It is a nine-disk helium platform with OptiNAND, a 512MB cache and a 550TB yearly workload, built for racks where drives run for years without a power cycle. WD prints no bay count for the HC560, so this guide claims none, but the Ultrastar line is the drive WD sells into hyperscale data centres, and the HC560 is the 20TB member of that family. The 512e sector format is the one most NAS systems expect, which is why the standard model is the pick here rather than the SED or 4Kn variants that share the family name.
Specs
- 20TB capacity, 3.5-inch form factor
- SATA 6Gb/s interface, 7200 RPM
- CMR recording, 512MB cache, helium sealed
- 550TB per year workload rating, 2.5M-hour MTBF
- Up to 269 MB/s sustained transfer
- 5-year warranty
- Ordering code 0F38785, model WUH722020BLE6L4, 512e Base (SE)
- OptiNAND technology, nine-disk platform
Best for: A data-centre build standardised on WD drives.
Watch out for: Ordering codes are easy to mix up — 0F38785 is the standard model, 0F38784 is the SED version and 0F38755 uses a different sector format, so confirm the listing shows 0F38785 and model WUH722020BLE6L4.
WD Gold 22TB (WD221KRYZ)
The Gold is WD’s enterprise drive, and the 22TB size is its sweet spot for a 64-bay array: two terabytes more per drive than the 20TB picks, which adds up to 128TB across sixty-four bays. It is a CMR drive with a 512MB cache, a 550TB yearly workload and vibration protection, and it carries time-limited error recovery, which protects the array during long rebuilds. The five-year warranty is the enterprise standard. Gold is the pick for a buyer who wants one vendor, one support line and one drive model across the whole array, and who is willing to confirm the exact model number before ordering.
Specs
- 22TB capacity, 3.5-inch form factor
- SATA 6Gb/s interface, 7200 RPM
- CMR recording, 512MB cache
- 550TB per year workload rating, 2.5M-hour MTBF
- Up to 269 MB/s sustained transfer
- 5-year warranty
- Vibration protection and time-limited error recovery
- No bay count printed — enterprise class qualifies it here
Best for: An enterprise WD array with two extra terabytes per drive.
Watch out for: The listing record was last crawled months ago, so confirm a current seller, and one distributor lists this drive as discontinued even though live Amazon listings remain — confirm stock before ordering sixty-four. WD201KRYZ and WD202KRYZ are near-identical 20TB numbers, so confirm the listing shows WD221KRYZ.
Toshiba MG09 18TB (MG09ACA18TE)
The MG09 is the value pick, and at sixty-four drives the value compounds. Eighteen terabytes is the smallest capacity here, so a full array holds 1152TB raw, but the per-terabyte cost is the lowest of the five, and the drive itself is a proper enterprise unit: helium sealed, nine disks, CMR recording, a 512MB cache and a 550TB yearly workload. It is the pick for a buyer who would rather spend the saving on a second array, a spare shelf of drives or the off-site copy that RAID can never replace. The 18TB size also suits arrays that already run MG09 drives and need matching replacements.
Specs
- 18TB capacity, 3.5-inch form factor
- SATA 6Gb/s interface, 7200 RPM
- CMR recording, 512MB cache, helium sealed
- 550TB per year workload rating, 2.5M-hour MTBF
- Up to 268 MB/s sustained transfer
- 5-year warranty
- Nine-disk helium platform, 2TB per platter
- No bay count printed — enterprise class qualifies it here
Best for: The lowest cost per terabyte across sixty-four drives.
Watch out for: The MG09 tops out at 18TB — the 20TB drive is the MG10, a different generation, so do not order it expecting an MG09. The TE model is 512e, the TA is 4Kn and the ACP is the SED version, so confirm the listing shows MG09ACA18TE.
Which One Fits Your Situation
You Want the Most Terabytes per Bay
The Exos X24 24TB is the pick. Sixty-four bays hold 1536TB raw, a quarter of a petabyte more than the same bays filled with 20TB drives, and the advantage grows with every expansion shelf. The 24TB size also means fewer drives per petabyte, which trims power and rack space. Confirm the chassis backplane accepts 24TB drives first, because some older backplanes stop below the top of the range.
You Already Run a Seagate Fleet
The IronWolf Pro 20TB is the pick. It is the only drive here whose data sheet prints unlimited bays, so there is no argument about whether sixty-four drives is a supported configuration. IronWolf Health Management watches each drive inside Synology and QNAP systems and warns before a drive fails, which is the warning that matters when a rebuild takes days. Keep the fleet on one model number, NT001, and do not mix in NE000 drives.
You Standardise on WD
Take the Ultrastar HC560 20TB for a data-centre build, or the Gold 22TB if two extra terabytes per drive matter more. Both are enterprise CMR drives with a 550TB yearly workload and a five-year warranty, and both come from the vendor whose support line already knows the array. The Ultrastar is the hyperscale pick, while the Gold adds time-limited error recovery that protects the array during long rebuilds. Either way, confirm the exact ordering code before ordering sixty-four.
You Want the Lowest Cost per Terabyte
The Toshiba MG09 18TB is the pick. Its per-terabyte cost is the lowest of the five, and across sixty-four drives that saving pays for spare drives, a second array or the off-site copy that RAID can never replace. The trade is capacity: a full MG09 array holds 1152TB raw against 1536TB for the Exos X24, so buy the MG09 when budget matters more than squeezing the last terabyte out of every bay.
Common Mistakes
- Buying WD Red Pro for a 64-bay array. It is capped at 24 bays, so it does not belong here no matter how good the deal looks.
- Mixing drive families, capacities or firmware in one array. The array treats every drive as the size of the smallest, and mixed firmware can behave differently under a rebuild.
- Ordering all sixty-four drives before testing one. Buy a single drive first, confirm it works in the chassis and on the controller, then order the rest.
- Treating RAID as a backup. RAID survives a dead drive; it does not survive deletion, ransomware or a flooded rack. Keep an off-site copy of anything irreplaceable.
- Skipping the compatibility list. A drive the NAS maker has never qualified can still misbehave at sixty-four bays, and a rebuild that takes days is the wrong time to find out.
Frequently Asked Questions
Can I use WD Red Pro drives in a 64-bay NAS?
No. WD rates Red Pro for up to 24 bays, and this guide does not recommend using it past that figure. A drive that was built and rated for a 24-bay chassis has no maker backing at sixty-four bays, where vibration and rebuild loads are far higher. Use an enterprise drive with no bay cap printed, or one like the IronWolf Pro NT001 that prints unlimited bays.
How long does a rebuild take on a 64-bay array?
Days, not hours. A single 20TB or 24TB drive holds an enormous amount of data, and the array must read every surviving drive while it writes the replacement. Expect the array to run slowly throughout the rebuild, and plan for a second drive to fail during that window, which is why RAID 6 or RAID-Z2 is the only sensible level at this scale.
Do all 64 drives have to be the same model?
They should be. Mixing capacities wastes space, because the array treats every drive as the size of the smallest, and mixing families or firmware can behave differently under a rebuild. One model across all sixty-four bays also makes spares simple: a single spare drive on the shelf fits any bay. If a match is discontinued, replace a vdev or RAID group rather than mixing one odd drive into it.
Is a 64-bay NAS a backup on its own?
No. A 64-bay array protects against dead drives, and RAID 6 survives two of them at once, but it does not protect against deletion, ransomware, a failed controller or a flooded rack. A backup is a separate copy on separate hardware, ideally off site. Treat the array as the live store and keep at least one more copy of anything irreplaceable somewhere else.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.






Write Your Review
No reviews yet. Be the first to share your experience!