Key takeaways
- Compare the best network switches for home, office and NAS setups, from budget 5-port gigabit models to managed, PoE+ and 2.5G multi-gig switches.
A network switch is the simplest fix for a router that has run out of Ethernet ports, and it also decides how fast a NAS can move files around a home. The short answer: for most homes, an unmanaged 8-port gigabit switch is the right buy. A managed switch earns its place when a NAS needs link aggregation or a VLAN, PoE+ matters when cameras or access points need power over the same cable, and a 2.5G switch only pays off when the NAS and attached computers already have 2.5G ports. The five switches below cover each case, from a compact 5-port budget box to a fanless 2.5G multi-gig switch.
Table of Contents
- How to Choose a Network Switch
- TP-Link TL-SG105 5-Port Gigabit Switch
- NETGEAR GS308 8-Port Gigabit Switch
- TP-Link TL-SG108E 8-Port Easy Smart Switch
- NETGEAR GS308PP 8-Port PoE+ Gigabit Switch
- TP-Link TL-SG108S-M2 8-Port 2.5G Switch
- Network Switches Compared
- Frequently Asked Questions
- Conclusion
- Product and ASIN Reference
How to Choose a Network Switch
Start by counting wired devices. A NAS, a desktop, a TV, a console and a printer already need five ports, plus one for the router uplink, so a 5-port switch fills up fast. An 8-port switch is the safer default for a home with a NAS, because it leaves room for more devices later.
Next, decide between unmanaged and managed. An unmanaged switch is plug and play: connect the router to any port, connect the devices to the rest, and the network works with no configuration. A managed switch adds a web interface for VLANs, QoS rules, port mirroring and link aggregation. Link aggregation matters most for NAS owners, because it bonds two Ethernet links between the switch and a dual-port NAS into one faster connection, while VLANs keep IoT devices or a guest network on a separate segment from the NAS.
Speed is the third decision. Gigabit ports move data at up to 1 Gbps per port, enough for internet traffic, 4K streaming and most backups. A 2.5G switch moves up to 2.5 Gbps per port, which shortens large NAS transfers noticeably, but only when the NAS and the computer on the other end both have 2.5G adapters. It still works with gigabit devices, since its ports auto-negotiate down, and it runs on existing Cat5e cabling.
Power over Ethernet is the fourth decision. A PoE+ switch sends power down the same Ethernet cable that carries data, so a camera, access point or VoIP phone needs no separate power adapter. PoE+ ports deliver up to 30 watts per port under the 802.3at standard, and the switch has a total PoE budget that caps what all ports can draw at once. All five switches below have fanless metal housings, which run silent and shed heat well.
TP-Link TL-SG105 5-Port Gigabit Switch
The TL-SG105 is the compact pick for a small setup. It adds five gigabit ports to a router in a metal box that fits on a desk or mounts on a wall, and it needs no configuration at all. It is the right choice when the device count is low and staying small and simple matters more than having spare ports.
Five ports cover a NAS, a desktop, a TV and a printer with one port left for the router uplink. The switch forwards traffic at full gigabit speed on every port, with a 10 Gbps switching capacity that matches five ports running at full duplex. QoS and IGMP snooping are built in even though the switch is unmanaged, which helps video and voice traffic stay smooth when the network is busy.
The trade-off is port count: a household that adds a second computer, a console or a media player will run out of ports and need a bigger switch. It is also gigabit only, so it cannot speed up transfers from a 2.5G NAS. For a small network that will stay small, it is the budget pick in this roundup.
Specs:
- Ports: 5 x 10/100/1000 Mbps RJ45, auto-negotiation, Auto-MDI/MDIX
- Switching capacity: 10 Gbps
- Management: unmanaged, plug and play
- Housing: fanless metal, desktop or wall mount
- Features: 802.1p/DSCP QoS, IGMP snooping
- Model: TL-SG105
- UPC: 840460604031
- Warranty: limited lifetime warranty
- ASIN: B00A128S24
- Tier: budget
NETGEAR GS308 8-Port Gigabit Switch
The GS308 is the standard 8-port gigabit switch in this roundup, and it is the pick for most homes with a NAS. It has eight gigabit ports in a fanless metal case, it is fully plug and play, and it leaves spare ports for devices added later.
Eight ports change the math: with one port going to the router, seven remain for a NAS, desktops, a TV, a console, a printer and a media streamer. The switch provides up to 16 Gbps of non-blocking bandwidth, so all eight ports can run at full gigabit speed at once. Energy Efficient Ethernet under IEEE 802.3az reduces power draw when traffic is light.
The GS308 is a true unmanaged switch with no web interface, no VLANs and no management features. That suits buyers who want a box that just works, but not NAS owners who want link aggregation or traffic segmentation. It is also gigabit only, so a 2.5G NAS gains no speed from it. For a home that needs more wired ports and nothing else, it is the straightforward choice, backed by a limited lifetime hardware warranty.
Specs:
- Ports: 8 x 10/100/1000 Mbps RJ45, auto uplink on all ports
- Switching capacity: 16 Gbps, non-blocking
- Management: unmanaged, plug and play
- Housing: fanless metal, desktop or wall mount
- Features: IEEE 802.3az Energy Efficient Ethernet
- Dimensions: 158 x 101 x 29 mm (6.2 x 4.0 x 1.1 in)
- Max power consumption: 3.04 watts
- Model: GS308-300PAS
- UPC: 606449140132
- Warranty: limited lifetime hardware warranty
- ASIN: B07PFYM5MZ
- Tier: budget
TP-Link TL-SG108E 8-Port Easy Smart Switch
The TL-SG108E is the managed pick for NAS owners who want control without enterprise complexity. It has the same eight gigabit ports as the unmanaged switches above, plus a web-based Easy Smart configuration utility for VLANs, QoS, IGMP snooping, port mirroring and link aggregation.
Link aggregation is the headline feature: a NAS with two gigabit ports can bond both links to the switch, increasing bandwidth for simultaneous transfers and adding redundancy if one cable fails. VLAN support covers up to 32 VLANs, so a storage VLAN can sit apart from IoT devices or a guest network, and QoS rules let backup traffic take priority over background downloads.
The switch still works as a plug-and-play unmanaged box when the configuration utility is never opened, so it fits a simple setup and a home lab that grows into managed features later. It is gigabit only, with no PoE and no 2.5G ports. The Easy Smart utility runs on Windows, which matters for households that run only other operating systems.
Specs:
- Ports: 8 x 10/100/1000 Mbps RJ45
- Switching capacity: 16 Gbps
- Management: Easy Smart managed via web utility
- Features: VLAN support up to 32 VLANs, QoS, IGMP snooping, link aggregation, port mirroring, loop prevention
- Housing: fanless metal, desktop or wall mount
- Model: TL-SG108E
- UPC: 840460604086
- Warranty: 3-year warranty
- ASIN: B00K4DS5KU
- Tier: mid-range
NETGEAR GS308PP 8-Port PoE+ Gigabit Switch
The GS308PP is the PoE+ pick. It has eight gigabit ports and every one of them can deliver PoE+ power, with a total PoE budget of 83 watts. That makes it the switch for a home where security cameras, wireless access points or VoIP phones should get power and data from a single Ethernet cable.
The 83-watt budget covers a realistic set of powered devices, and the FlexPoE design lets it grow later by swapping the external power adapter for a larger one. The switch ships with a 90-watt adapter, a rack-mount kit and a wall-mount kit, so it can go on a desk, on a wall or in a small rack.
Beyond PoE, the GS308PP is an unmanaged gigabit switch in the same family as the GS308: eight gigabit ports, plug and play, fanless metal housing, no web interface and no management features. Devices that do not need power use the ports as ordinary gigabit ports. It is gigabit only, so it does not speed up a 2.5G NAS.
Specs:
- Ports: 8 x 10/100/1000 Mbps RJ45, all with PoE+
- PoE budget: 83 watts total, 802.3at PoE+
- Management: unmanaged, plug and play
- Housing: fanless metal, desktop, wall or rack mount
- Features: FlexPoE with interchangeable external power adapter
- Included: 90-watt external power adapter, rack-mount kit, wall-mount kit, installation guide
- Model: GS308PP-100NAS
- UPC: 606449146820
- ASIN: B082G2G2F8
- Tier: mid-range
TP-Link TL-SG108S-M2 8-Port 2.5G Switch
The TL-SG108S-M2 is the premium pick and the only multi-gig switch in this roundup. All eight ports negotiate at 100 Mbps, 1 Gbps or 2.5 Gbps, with a 40 Gbps switching capacity. It is the switch for a NAS with a 2.5G port, where it cuts large transfer times to less than half of what a gigabit switch allows.
All eight ports are multi-gig, unlike switches that mix a few fast ports with slower ones, so the NAS, the desktop and a 2.5G access point can all connect at full speed. The switch works over existing Cat5e cabling, and older gigabit devices still connect normally, since each port auto-negotiates down.
The switch is unmanaged, with no VLANs, no link aggregation controls and no port statistics, so it trades management features for speed and simplicity. Loop prevention, QoS and IGMP snooping are built in. It is fanless and silent, and it draws up to 9.11 watts at maximum load. For a home where the NAS is the bottleneck and the computers already have 2.5G adapters, this is the upgrade that makes the difference.
Specs:
- Ports: 8 x 100 Mbps / 1 Gbps / 2.5 Gbps RJ45, auto-negotiation, Auto-MDI/MDIX
- Switching capacity: 40 Gbps
- Packet forwarding rate: 29.8 Mpps
- Management: unmanaged, plug and play
- Housing: fanless metal, desktop or wall mount
- Features: loop prevention, QoS, IGMP snooping, works over Cat5e cabling
- Dimensions: 6.2 x 4.0 x 1.0 in (158 x 101 x 25 mm)
- Weight: 1.68 lb
- Max power consumption: 9.11 watts
- Model: TL-SG108S-M2
- UPC: 840030711060
- Warranty: limited lifetime warranty
- ASIN: B0CMFX748Y
- Tier: premium
Network Switches Compared
| Switch | Ports | Speed | Managed | PoE | Best For |
|---|---|---|---|---|---|
| TP-Link TL-SG105 | 5 | Gigabit | No | No | Small networks on a budget |
| NETGEAR GS308 | 8 | Gigabit | No | No | Most homes with a NAS |
| TP-Link TL-SG108E | 8 | Gigabit | Easy Smart | No | VLANs and NAS link aggregation |
| NETGEAR GS308PP | 8 | Gigabit | No | 83 W PoE+ | Cameras and access points |
| TP-Link TL-SG108S-M2 | 8 | 2.5G | No | No | Fast NAS transfers |
Buy the TL-SG105 for a small network that will stay small. Buy the GS308 when eight gigabit ports and zero configuration are the whole requirement. Buy the TL-SG108E when a NAS needs link aggregation or VLAN segmentation. Buy the GS308PP when cameras or access points need power over the same cable. Buy the TL-SG108S-M2 when the NAS and computers already have 2.5G ports.
Frequently Asked Questions
Do I need a managed switch for a NAS?
Not for basic use: an unmanaged switch moves files between a NAS and computers at full speed with no setup. A managed switch earns its place when the NAS has two network ports and link aggregation is wanted, or when VLANs must separate storage traffic from IoT devices or a guest network. The TL-SG108E covers both cases at a mid-range tier.
Is a 2.5G switch worth it for a NAS?
Only when both ends support it. A 2.5G switch speeds up transfers when the NAS has a 2.5G port and the computer receiving the files also has a 2.5G adapter. If either end is gigabit only, transfers run at gigabit speed and the faster switch adds nothing. A 2.5G switch still works with gigabit devices, since its ports auto-negotiate down, and it runs on Cat5e cabling.
How many ports do I need?
Count every wired device, add one port for the router uplink, and add one or two spare ports for future devices. A NAS, a desktop, a TV and a printer need four device ports plus the uplink, which fills a 5-port switch exactly. An 8-port switch is the safer default for most homes, because it leaves room to grow.
What is PoE and do I need it?
Power over Ethernet sends electrical power down the same cable that carries network data, so a camera, access point or VoIP phone needs no separate power adapter. PoE+ under the 802.3at standard delivers up to 30 watts per port, and it is needed only when powered devices are part of the plan.
Conclusion
The right network switch depends on what the network has to do. A 5-port gigabit switch covers a small setup, an 8-port gigabit switch covers most homes with a NAS, an Easy Smart managed switch adds VLANs and link aggregation, a PoE+ switch powers cameras and access points over the same cable, and a 2.5G switch removes the speed ceiling for a NAS with a multi-gig port. All five are fanless and plug and play at their core, so the choice comes down to port count, management, power delivery and speed. Count the wired devices, check whether the NAS has one port or two, and match the switch to the network that already exists.
As an Amazon Associate, we earn from qualifying purchases.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!