Key takeaways
- Find the best NVMe SSDs for Raspberry Pi 5 NVMe HATs and base boards, covering 2230, 2242 and 2280 sizes, power draw and boot setup tips today.
The Raspberry Pi 5 added a PCI Express connector that changed how the board handles storage. With an NVMe HAT on top or a base board underneath, the Pi 5 can boot and run from a proper solid state drive instead of a microSD card. The result is faster boot times, snappier desktop and server response, better endurance under constant logging and database writes, and a far more reliable base for home servers, media centres and development work.
Choosing the drive needs Pi specific thinking. The official M.2 HAT plus accepts M.2 2230 and 2242 drives, while many base boards and third party HATs accept full length 2280 drives. The Pi 5 supplies a single PCIe 2.0 lane by default, with PCIe 3.0 operation available as an advanced setting, so headline drive speeds far exceed what the link can carry. Power draw, single sided layout, controller compatibility and standby behaviour matter more than peak benchmarks. This guide covers five verified drives across the sizes that fit real Pi 5 boards, and explains the setup choices that keep a Pi storage build stable.
As an Amazon Associate, we earn from qualifying purchases.
Quick answer
For the official M.2 HAT plus and other 2230 boards, the WD Black SN770M 1TB is the safest all round pick, with a single sided 2230 design, modest power needs and broad compatibility reports. Owners of 2280 base boards who want maximum headroom should choose the Samsung 990 PRO 2TB, while value builds suit the Kingston NV3 and Sabrent Rocket 2230 drives.
WD Black SN770M 1TB M.2 2230 SSD
The SN770M was designed for compact devices, and that design maps neatly onto Pi 5 HAT builds. It is a single sided M.2 2230 drive, which is the exact size the official M.2 HAT plus and many compact top boards are built around. Rated sequential reads reach up to 5,150 MB per second on a full desktop link, and while the Pi 5 PCIe connection will cap real transfers far below that figure, the headroom means the drive never becomes the bottleneck in this pairing.
More important for Pi use is behaviour at low power. The SN770M uses a DRAM-less design with Host Memory Buffer support on hosts that provide it, TLC flash and power management aimed at handheld and compact systems, which suits a board powered from a modest USB C supply. Capacity at 1TB is generous for a Pi server, leaving room for containers, media indexes and backups of the boot volume itself. For a first NVMe Pi build with the standard HAT, this is the lowest risk starting point.
Corsair MP600 MINI 1TB M.2 2230 SSD
The Corsair MP600 MINI is another single sided 2230 drive aimed at compact systems, and the current MINI generation raises rated sequential reads to up to 7,000 MB per second on a PCIe 4.0 host. On the Pi 5 that ceiling is unreachable, yet the drive earns its place through its TLC flash, mature Phison based controller behaviour and consistent low load response, which is the pattern a Pi produces all day.
Pi builders should pay attention to firmware and power state support on any fast compact drive. The MP600 MINI has a wide installed base in handheld PCs and small systems, which means its idle and sleep behaviour is well understood, and it pairs cleanly with common HAT and base board designs that expect a 2230 drive. Heat output under the Pi bursty workload is modest, though a HAT build inside a closed case still benefits from airflow. For builders who want a premium 2230 option beyond the WD line, this is the natural alternative.
Sabrent Rocket 2230 1TB NVMe SSD
Sabrent was early to the retail 2230 market, and the Rocket 2230 remains a Pi friendly choice for the same reasons it suited handheld PCs. It is a single sided M.2 2230 drive with a PCIe 4.0 interface, TLC flash and rated speeds up to 5,000 MB per second on a suitable host. On the Pi 5, its value lies in predictable controller behaviour, good availability in the exact size that HAT boards need, and a design that draws power in line with compact system expectations.
The Rocket 2230 fits the official HAT format without adapters or board extensions, keeping a build tidy inside standard cases. That physical simplicity matters for Pi projects that live on shelves, in network cupboards or inside enclosures where a loose extension board invites connection faults. Builders comparing the three 2230 drives here can decide on availability and maker preference, because all three are technically sound Pi choices.
Kingston NV3 2TB M.2 2230 NVMe SSD
The Kingston NV3 in 2230 form brings unusually large capacity to the smallest Pi boards. This 2TB model keeps the single sided 2230 layout that HAT designs require, while doubling the room of the 1TB drives above. Kingston rates the NV3 line at sequential reads up to 6,000 MB per second on a desktop host, and the drive uses a DRAM-less design aimed at efficient everyday performance.
For Pi use, the headline is space per board. A 2TB drive on a Pi 5 supports roles that smaller drives make awkward: a local media server with a real library, a network backup target for a couple of computers, an off site replica node in a home backup plan, or a development board holding many container images and datasets. The cautions are power and expectations. A large drive under sustained write load can draw more current, so the official 5V 5A class power supply and a quality HAT connection are strongly advised. Endurance and write behaviour suit home server duty well, provided constant maximum rate writing is not the plan. For capacity led Pi builds in the official HAT size, this is the standout option.
Samsung 990 PRO 2TB M.2 2280 SSD
The 990 PRO is a full length 2280 flagship drive, so it belongs with Pi 5 base boards and HATs that explicitly accept 2280 media, not with the official compact HAT. Within that setup it brings dedicated DRAM, top tier TLC flash and rated sequential reads up to 7,450 MB per second, almost all of which the Pi link cannot use. The reasons to choose it anyway are endurance, consistency and reuse value, because a drive bought for a Pi today can move to a desktop later without compromise.
A base board build also changes the physical picture. The drive sits below or beside the Pi with more air around it, and the larger board area simplifies mounting. Power draw at desktop class levels means the recommended high capacity Pi power supply is essential, and cheap supplies are the most common cause of unstable NVMe Pi builds regardless of drive brand. For a Pi that serves as a small always on server and justifies flagship storage, the 990 PRO is the long life choice.
How to choose
Match the drive length to the board first. The official Raspberry Pi M.2 HAT plus takes 2230 and 2242 drives, many third party top HATs follow the same limit, and base boards from popular makers commonly take 2280 drives. Buying a 2280 drive for a 2230 board is the most frequent Pi storage mistake, and no adapter fixes it cleanly inside a case.
Second, budget power before speed. Use the recommended 27W class USB C supply for the Pi 5, check that the HAT is rated for the drive current, and treat under voltage warnings as a storage reliability problem, not a cosmetic one. A drive that resets under load can corrupt a file system faster than a slow drive ever will.
Third, set expectations for the link. The Pi 5 exposes one PCIe lane, Gen 2 by default and Gen 3 as an optional advanced configuration, so every drive in this guide will run at a fraction of its desktop rating. That is fine, because random response and endurance are the real gains over microSD. Finally, plan the boot setup: update the Pi bootloader, enable NVMe boot in the configuration, keep a known good microSD rescue card, and back up the finished system image once the build is stable.
Who should skip
Skip NVMe entirely if the Pi runs a single light service from a quality endurance microSD card and shows no wear or speed problems, because a HAT, drive and stronger power supply add cost and complexity that a simple build may never repay. Pico scale projects, read only kiosks and disposable test boards often sit in this group.
Also skip the flagship 2280 route if the chosen case or HAT cannot physically fit or cool a full length drive. Forcing a large drive into a compact HAT build creates the instability that gives Pi storage projects a bad name. A right sized 2230 drive in a supported board will outperform a badly fitted flagship every day of the week.
FAQ
Can the Raspberry Pi 5 boot directly from NVMe?
Yes. Current Pi 5 bootloader firmware supports NVMe boot through a connected HAT or base board. The usual process is to update the firmware from a microSD install, set the boot order to try NVMe, write the operating system image to the drive and then boot without the card. Keeping the card as a rescue tool is sensible for the first weeks of a new build.
Does a faster rated SSD make the Pi 5 faster?
Only up to the limit of the Pi single PCIe lane. Every drive here exceeds that limit on sequential transfers, so desktop ratings do not separate them in a Pi. The differences that remain visible are random access response, behaviour under sustained writes, power draw and endurance. Those are the figures to compare for this platform, not the headline speed on the box.
Is PCIe Gen 3 mode worth enabling on the Pi 5?
Gen 3 mode can raise transfer speeds on the single lane and is popular with experienced builders, but it is an advanced, non default setting and stability varies with board, drive and signal quality. A storage server that must run unattended is usually better served by default Gen 2 settings. Builders who enable Gen 3 should validate the system under load and keep verified backups.
How should a Pi NVMe system be backed up?
Treat the Pi like any small server. Back up configuration and data to a separate device on a schedule, keep an image of the working boot drive after major changes, and store one copy away from the Pi itself. A drive failure and a board failure look identical to the services that depend on them, so the backup plan should assume the whole unit can be lost.
Final verdict
The SN770M is the default recommendation for official HAT builds, the MP600 MINI and Rocket 2230 are strong 2230 alternatives with different maker strengths, and the Kingston NV3 brings 2TB capacity to the same compact size. Owners of 2280 base boards who value endurance and future reuse can step up to the 990 PRO. In every case, the supporting choices decide success: the right board size, a proper power supply and a tested backup routine.
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
A free business account with business pricing and bulk-buying tools for work, shop or home office.
Create a business accountFree shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeAs an Amazon Associate we earn from qualifying purchases.

Write Your Review
No reviews yet. Be the first to share your experience!